[Membership Portal Raffle] How to Apply a Transfer Sticker

Congratulations, you won the stickers pack exclusively made by the IT Team. Included in your stickers pack is a transfer sticker with VEYM IT logo. If you would like to use this sticker and are not familiar with how to apply a transfer sticker, here are the instructions on how you can apply the sticker on the chosen surface. 

Step 1: Transfer sticker works best on a smooth and clean space. Please make sure to clean your desired area before apply the sticker.

Step 2: Peel the clear transfer tape to remove the actual sticker from the paper backing. Make sure the sticker itself is attached to the transfer tape and not sticking on the backing. The transfer tape will hold the sticker pieces in their positions. 

Step 3: Carefully put the transfer tape with the actual sticker over the desired area. The clear transfer tape allows you to aim and adjust the position before you adhere it. 

Step 4: Place the transfer tape onto the desired area. After your sticker is positioned correctly, use a credit card or a similar tool to apply pressure to the entire design to make sure it is fully adhered. You may need to leave the sticker with the transfer tape there for a bit to let the sticker adheres more strongly to the surface. 

Step 5: Slowly and carefully peel the transfer tape away at a 180 degree angle to leave the actual sticker adhered. If the sticker is not sticking to the surface, put the transfer tape back and reapply pressure + leave it there for longer.